SectorCare Contoured Latex Seat Cushion with Hollow Centre 42cm Pink

Sit Comfortably for Longer on a 42cm Contoured Cushion with a Ventilated Hollow Centre

42 x 42cm · 7cm profile · 0.84kg · latex core · breathable mesh cover · zipped · hollow ventilated centre · W contoured front · Pink with grey base · GST free

Most chairs are built for a twenty minute sit. Dining chairs, office chairs, wheelchairs and waiting room seating all become hard work after an hour, and the discomfort builds in the same few places every time. This 42cm cushion spreads the load differently. A hollow centre passes right through the cushion so that area sits over an open gap rather than pressing against the seat, and the moulded contours carry the weight through the surrounding surface instead.

The front edge is W contoured, which lets the thighs settle naturally rather than being pushed up at the front, a common cause of that tingling feeling after a long sit. The latex core gives a firmer, more responsive feel than soft foam and holds its shape under weight. Over the top is a breathable mesh cover on a zip, and the hollow centre doubles as a ventilation channel, so heat and moisture have somewhere to go on a warm day or through a long afternoon. At 0.84kg and 7cm thick, the cushion moves easily between chairs and does not raise the seat so far that the feet stop reaching the floor.

Product Features

• Hollow ventilated centre: the cutout passes through the full 7cm depth, so the centre of the seat carries no direct contact and air can move through.
• 3D moulded pressure distribution: the contoured surface spreads weight across the whole seat rather than concentrating it in a few spots.
• W contoured front edge: lets the thighs relax naturally instead of being lifted at the front, which is what causes the tingling after a long sit.
• Inward contouring hip support: the side walls rise gently to cradle the hips and keep the sitter centred on the cushion.
• Latex core: firmer and more responsive underfoot than soft foam, and it returns to shape rather than flattening out over months of use.
• Breathable mesh cover on a zip: open weave fabric that lets air through, over a zipped closure.
• 42 x 42cm at 7cm thick: fits standard dining, office and wheelchair seats without lifting the sitter so high that their feet lose the floor.
• Light at 0.84kg: easy to carry between the dining table, the armchair and the car.

Perfect For

• Dining and lounge chairs at home: turns a hard wooden chair into somewhere you can stay through a full meal or an evening.
• Office and desk chairs: adds contoured support and airflow through a full working day.
• Aged care and nursing home seating: light enough for staff to move between chairs and residents, with a wipe friendly mesh surface.
• Wheelchairs and recliners: the 42 x 42cm footprint suits standard seat widths and the 7cm profile keeps the transfer height sensible.
• Car seats and long drives: portable enough to move from the house to the car and back.
• Waiting rooms and long flights: anywhere the seating is fixed and the sit is longer than the chair was designed for.

A Contoured Seat Cushion That Makes Long Sitting Easier Across Australia

Comfort over a long sit comes down to where the pressure goes. This 42 x 42cm cushion combines a hollow ventilated centre, a 3D moulded contoured surface and a W shaped front edge over a latex core, finished with a breathable zipped mesh cover, all at 0.84kg and a 7cm profile. Suited to home dining and lounge chairs, office seating, aged care and nursing home settings, wheelchairs and recliners, the car and long flights, and supplied GST free across Australia. Contains latex.